package com.mes.util;

import com.mes.ui.DataUtil;
import com.mes.ui.MesClient;
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;

import java.util.Timer;
import java.util.TimerTask;

public class WorkTimer {
    private static final Logger log = LoggerFactory.getLogger(WorkTimer.class);
    // 工位1
    private static Timer stopTimer1 = null;
    private static Timer workTimer1 = null;
    public static ATEQ ateq1 = new ATEQ(new SerialUtil(Config.portName1), Config.gw_1);
    // 工位2
    private static Timer stopTimer2 = null;
    private static Timer workTimer2 = null;
    public static ATEQ ateq2 = new ATEQ(new SerialUtil(Config.portName2), Config.gw_2);

    private WorkTimer() {
    }

    public static void start() {
        // 工位1
//        if (stopTimer1 == null) {
//            stopTimer1 = new Timer();
//            stopTimer1.schedule(new StopTimerTask1(), 1000, 1000);
//        }
        if (workTimer1 == null) {
            workTimer1 = new Timer();
            workTimer1.schedule(new WorkTimerTask1(), 1000, 2000);
        }

        // 工位2
//        if (stopTimer2 == null) {
//            stopTimer2 = new Timer();
//            stopTimer2.schedule(new StopTimerTask2(), 1000, 1000);
//        }
        if (workTimer2 == null) {
            workTimer2 = new Timer();
            workTimer2.schedule(new WorkTimerTask2(), 1000, 2000);
        }

    }

    public static void stop() {
        // 工位1
        if (stopTimer1 != null) {
            stopTimer1.cancel();
            stopTimer1 = null;
        }
        if (workTimer1 != null) {
            workTimer1.cancel();
            workTimer1 = null;
        }
        // 工位2
        if (stopTimer2 != null) {
            stopTimer2.cancel();
            stopTimer2 = null;
        }
        if (workTimer2 != null) {
            workTimer2.cancel();
            workTimer2 = null;
        }
    }

    // 工位1发送禁止运行的定时任务
    private static class StopTimerTask1 extends TimerTask {
        @Override
        public void run() {
            try {
                if (MesClient.work_status1 == 0 || !MesClient.check_quality_result1) {
                    ateq1.stop(); // 发送重置命令, 禁止设备启动
                }
            } catch (Exception e) {
                log.error("{} 向设备发送禁止运行的定时任务报错", Config.gw_1, e);
            }
        }
    }

    // 工位1工作流程定时任务
    private static class WorkTimerTask1 extends TimerTask {
        @Override
        public void run() {
            try {
                if (MesClient.work_status1 == 1 && MesClient.check_quality_result1) {
                    ATEQ.RealtimeResult realtimeResult = ateq1.readRealtimeResult();  // 循环查询实时结果
                    log.info("{}: {}", Config.gw_1, realtimeResult.toString());

                    // 实时更新显示的压力值和泄漏值
                    Boolean isEnd = realtimeResult.isCycleEnd;
                    MesClient.pressureText_1.setText(isEnd ? "" : realtimeResult.pressureValue + " " + realtimeResult.pressureUnit);
                    MesClient.leakText_1.setText(isEnd ? "" : realtimeResult.leakValue + " " + realtimeResult.leakUnit);
                    MesClient.setMenuState_1(isEnd ? "该工件可以加工" : "正在加工", 0);

                    if (realtimeResult.isCycleEnd && realtimeResult.FIFO_Number > 0) {  // 如果查询到测试结束并且待处理结果数大于0
                        ATEQ.LastResult lastResult = ateq1.readLastResult();
                        log.info("{}: {}", Config.gw_1, lastResult.toString());

                        String ret = lastResult.isPass ? "OK" : "NG";

                        String pressureValue = String.valueOf(lastResult.pressureValue);
                        String pressureString = pressureValue + " " + realtimeResult.pressureUnit;
                        String leakValue;
                        String leakString;
                        if(Math.abs(lastResult.leakValue) < 1e-10 && !lastResult.isPass) {
                            leakValue = "气压过低";
                            leakString = leakValue;
                        } else {
                            leakValue = String.valueOf(lastResult.leakValue);
                            leakString = leakValue + " " + realtimeResult.leakUnit;
                        }

                        MesClient.pressureText_1.setText(pressureString);
                        MesClient.leakText_1.setText(leakString);

                        String sn = MesClient.getBarcode33(MesClient.product_sn_1.getText());
                        Boolean result = false;
                        if(lastResult.leakValue < 1e-10 && lastResult.leakValue > -1e-10 && lastResult.isPass == true) {
                            MesClient.setMenuState_1("泄露值为0,请重测", 0);
                            MesClient.resetScanA();
                        } else {
                            result = DataUtil.sendQuality(sn, ret, MesClient.user20, Config.gw_1);
                        }
                        // 获取当前运行的程序的填充时间、稳定时间、测试时间
                        ATEQ.Parameters params = ateq1.getParams(lastResult.programNumber);
                        log.info("{}: {}", Config.gw_1, params.toString());

                        if (result) {
                            MesClient.setMenuState_1("加工完成,结果:" + ret, 0);
                            DataUtil.bindLeakValue(sn, leakString, Config.gw_1);

                            // 将气密参数放入本地SQLite数据库
                            QMParamsDAO.insert(Config.gw_1, sn.trim(), lastResult.programNumber, ret, pressureValue, leakValue, lastResult.pressureUnit, lastResult.leakUnit, params.fillTime, params.stabilizeTime, params.testTime, MesClient.user20 );//添加作业人员

                            // 刷新工作面板
                            MesClient.resetScanA();
                        }
                    }
                }
            } catch (Exception e) {
                log.error("{} 工作定时任务报错", Config.gw_1, e);
            }
        }
    }


    // 工位2发送禁止运行的定时任务
    private static class StopTimerTask2 extends TimerTask {
        @Override
        public void run() {
            try {
                if (MesClient.work_status2 == 0 || !MesClient.check_quality_result2) {
                    ateq2.stop(); // 发送重置命令, 禁止设备启动
                }
            } catch (Exception e) {
                log.error("{} 向设备发送禁止运行的定时任务报错", Config.gw_2);
            }
        }
    }


    private static class WorkTimerTask2 extends TimerTask {
        @Override
        public void run() {
            try {
                if (MesClient.work_status2 == 1 && MesClient.check_quality_result2) {
                    ATEQ.RealtimeResult realtimeResult = ateq2.readRealtimeResult();  // 循环查询实时结果
                    log.info("{}: {}", Config.gw_2, realtimeResult.toString());

                    // 实时更新显示的压力值和泄漏值
                    Boolean isEnd = realtimeResult.isCycleEnd;
                    MesClient.pressureText_2.setText(isEnd ? "" : realtimeResult.pressureValue + " " + realtimeResult.pressureUnit);
                    MesClient.leakText_2.setText(isEnd ? "" : realtimeResult.leakValue + " " + realtimeResult.leakUnit);
                    MesClient.setMenuState_2(isEnd ? "该工件可以加工" : "正在加工", 0);

                    if (realtimeResult.isCycleEnd && realtimeResult.FIFO_Number > 0) {  // 如果查询到测试结束并且待处理结果数大于0
                        ATEQ.LastResult lastResult = ateq2.readLastResult();
                        log.info("{}: {}", Config.gw_2, lastResult.toString());

                        String ret = lastResult.isPass ? "OK" : "NG";

                        String pressureValue = String.valueOf(lastResult.pressureValue);
                        String pressureString = pressureValue + " " + realtimeResult.pressureUnit;
                        String leakValue;
                        String leakString;
                        if(Math.abs(lastResult.leakValue) < 1e-10 && !lastResult.isPass) {
                            leakValue = "气压过低";
                            leakString = leakValue;
                        } else {
                            leakValue = String.valueOf(lastResult.leakValue);
                            leakString = leakValue + " " + realtimeResult.leakUnit;
                        }

                        MesClient.pressureText_2.setText(pressureString);
                        MesClient.leakText_2.setText(leakString);

                        String sn = MesClient.getBarcode33(MesClient.product_sn_2.getText());
                        Boolean result = DataUtil.sendQuality(sn, ret, MesClient.user20, Config.gw_2);

                        // 获取当前运行的程序的填充时间、稳定时间、测试时间
                        ATEQ.Parameters params = ateq2.getParams(lastResult.programNumber);
                        log.info("{}: {}", Config.gw_2, params.toString());
                        if (result) {
                            MesClient.setMenuState_2("加工完成,结果:" + ret, 0);
                            DataUtil.bindLeakValue(sn, leakString, Config.gw_2);

                            // 将气密参数放入本地SQLite数据库
                            QMParamsDAO.insert(Config.gw_2, sn.trim(), lastResult.programNumber, ret, pressureValue, leakValue, lastResult.pressureUnit, lastResult.leakUnit, params.fillTime, params.stabilizeTime, params.testTime, MesClient.user20);

                            // 刷新工作面板
                            MesClient.resetScanB();
                        } else {
                            MesClient.setMenuState_2("结果提交失败，请重试", -1);
                        }
                    }
                }
            } catch (Exception e) {
                log.error("{} 工作定时任务报错", Config.gw_2);
            }
        }
    }


}